Показать сообщение отдельно
  #5  
Старый 03.09.2011, 20:27
Ariana Ariana вне форума
Администратор
 
Регистрация: 07.09.2010
Сообщений: 7,940
По умолчанию Minni Mouse tutorial

Minne Mouse Tutorial
Название: Minni Mouse Tutorial Step 1.jpg
Просмотров: 192

Размер: 439.0 Кб
1. Shoes: Roll two 3/4" yellow balls into eggs. Pinch to point the ends, making the toes slightly more pointed. Bend the backs upward. Toll two 1/4" yellow balls into 1/4" log logs and press one onto the bottom back of each shoe for the high heels. Use your finger to indent the center of each shoe.

2. Legs: Roll a 2/16" x 1 3/4" black log; cut in half. Bend the lower end of each to form an L and pinch the flatten it into a point. Attach the bent end to the top of the shoe and press it against the shoe so the leg extends upwards. Insert straight pins as shown. leaving 1/4" extending. Bake; let cool.

3. Dress: Roll an 11/16" red ball into a cone. Press the flat end onto the table and bend the top backward.
Panties: Roll a 3/4" white ball. Press one side to flatten it so it will match the bottom of the dress and attach. Gently smooth the edges - don`t overdo it or you'll smear the colors. Skirt: Roll a 3/4" red ball to 4" long; flatten. Starting in the back, wrap one edge around her waist. Trim any excess and join the seam smoothly. Pinch the free edge to flare it in a wavy pattern. Use the side of the needle to imprint gather lines in the dress above the ruffle.
4. Panty ruffles: Flatten white clay to 1/8" thick and use the flower cutter to cut two ruffles. Hold the body so it`s tipped fowrad (Minnie is curtsying from her hips) and attach the flowers side by side at the bottom of the panties. Press the leg pins into the flowers - check to be sure she is balanced over her feet.

Название: Minni Mouse Tutorial Step 2.jpg
Просмотров: 159

Размер: 511.6 Кб
5. Sleeves: Roll two 3/8" red balls, flatten one side of each and attach the shoulders. Flatten twho 1/4" white balls and attach for the cuffs. Use the paintbrush handle to poke a 1/4" deep hole into each cuff. Use the needle to make gathers in the sleeves avove the cuffs. Collar: Flatten white to 1/16" thick and use the flower cutter to cut the collar. Attach to the dress top. Insert a straight pin through the collar, leaving 1/2" extending.
6. Arms: Roll two 5/16" black balls into 1/2" long tapered logs. Press the small ends into the holes in the sleeves. Insert a straight pin into the end of each arm with 1/4" extending. Bake for ten minutes: let cool.
7. Gloves: Shape a 5/8" white ball into a mitten. Use the "X-acto" knife to make two 1/4" slices in the wide end, forming three fingers. Pull the fingers apart Round and smooth the edges. Use the needle to draw three lines on the back Repeat to make another glove the reverse of the first.

8. Flatten two 1/4" white balls to 1/8" thick and attach one to the end of each arm. Press a glove onto each arm so the thumbs are forward. Raise the pinky fingers for a dainey look. Curve the forefinger and middle finger of her right hand towards the thumb as shown.

9. Head: Roll a 7/8" black ball (don`t put on the body yet). Flatten beige to 1/16" thick and use the 3/4" heart cutter to cut the face. Attach to the center front of the ball. Shape a 3/8" beige ball into a 1 1/2 long log. Slightly flatten, tapering the ends and pinching a traingular chin. Press around the bottom of the heart as shown.

10. Muzzle: Roll a 3/8" beige ball into an ova and flatten on end. Pinch out the sides. Attach as shown, aligning with the black corners of the head. Blend the seam. Eyes: Roll two 3/16" white balls into ovals; flatten.
Attach 1/16" apart above the muzzle. Flatten two 3/32" black balls into ovals and attach as shown. Nose: Roll a 3/16" black ball into an oval and attach one small end to the muzzle end. Ears: Flatten black clay to 1/4" and use the 5/8" circle cutter to make two ears. Pres onto theback of the head, 1/4" apart, flat sides forward. Round the top edges.

11. Use the needle to draw the smile: twist to make a dimple on each end. Use your fingertips to soften the edges and open the mount slightly. Flatten rose to 1/16" thick and use the 1/8" heart cutter to cut a tongue. Pres into the center of the mouth, point forward, and indent the center with the side of the needle. Attach the head fo the body so Minnie`s looking upward.

12. Bow: Shape two 7/16" red balls into fat traingles.Press them, points together, in front of her ears. Roll a 1/4" red ball into a 1/2" long snake, tapering the ends; wrap around the bow center. Use the needle to imprint knot lines.
Polka dots: flatten white clay to 1/16" thick. Use the 1/8" circle cutter to cut lots of dots; press all over her bow and dress. Bake let cool. Use the pen to draw three eyelashes above each eye, as shown in the large photo on page 2.
Ответить с цитированием